Maintenance
6606−1/A1
Winterthur Gas & Diesel Ltd.
7/ 7
4. Completion
1) Install the inlet pipe (7, Fig. 10)
2) Install the outlet pipe (2, 7).
3) Install the drain pipe (5).
4) Install the vent pipe (6).
5) Open the butterfly valves (1) of the
SAC (3).
6) Release the air from the SAC.
7) Start the cooling water pump.
8) Make sure that there are no leaks.
9) Make sure that no scavenge air flows
between the SAC (3) and the SAC
housing.
10) Stop the cooling water pump.
Scavenge Air Cooler: Removal and Installation
2016
WCH00708
FUEL SIDE
2
3
4
1
6
5
7
Fig. 10
To Next Page
Loading...