ELECTRICAL SYSTEM
M8540Narrow, M9540Narrow, WSM
N9-S5
[2] METER PANEL
(1) Setting Mode (Entering Travel Speed Coefficient)
• To perform the meter panel, the operator must be seated on the tractor.
LCD Monitor Indication
The following settings and checking can be done by using the
LCD monitor (1), PTO/Hour meter select switch (3) and traveling
speed select switch (2).
1. Setting Mode:
Input the various dates (PTO speed display mode switching,
entering the traveling speed coefficient and model select) to the
meter panel.
2. Checking Mode :
Check a voltage of various sensor (fuel unit sensor, coolant
temperature sensor and monitor voltage (battery voltage)) or
rotation of engine.
9Y1210236ELS0006US0
(1) LCD Monitor
(2) Traveling Speed Select Switch
(3) PTO/Hour Meter Select Switch
To Next Page
