GENERAL
M8540Narrow, M9540Narrow, WSM
NG-46
9. TIRES
• Do not attempt to mount a tire on a rim. This should be done by a qualified person with the proper
equipment.
• Always maintain the correct tire pressure. Do not inflate tires above the recommended pressure show in
the operator's manual.
• Do not use tires other than those approved by KUBOTA.
• Dual tires are not approved.
• When optional different-diameter tires are fitted on the machine, the travel speed display mode must be
changed. Otherwise the travel speed will not get correctly displayed. Such mode switching is also needed
when the original tires are back on the machine. (Refer to "4. CHECKING AND ADJUSTING" at "N9.
ELECTRICAL SYSTEM" section.)
9Y1210236GEG0071US0
To Next Page
Loading...
