445-0089-01-01
1
Section 1 Introduction
Congratulations on your purchase of the PROsine
®
2.0 Inverter•Charger! As
part of the PROsine Inverter•Charger family, the 2.0 gives you quality power,
worry-free operation, and outstanding reliability. Its integrated inverting–
charging functions and numerous power management features make it ideal
for marine installations, recreational and commercial vehicles, and residential
back-up systems.
Quality Power
The PROsine’s true sine wave output is identical to (or better
than) the power supplied by your utility. A few of the benefits of true sine
wave power are less interference on your TV set, more consistent cooking in
your microwave, better handling of sensitive loads, and the ability to use
dimmer switches and appliances with speed controls. In effect, the PROsine
2.0 gives you a high quality, mobile wall socket!
Comprehensive Protection
The PROsine’s built-in protection features
safeguard your batteries and equipment to give you worry-free operation:
• The adjustable
low battery cutout
prevents your batteries from becoming
completely discharged.
•The
battery temperature sensor
ensures that the charge delivered to the
batteries is adjusted according to their actual temperature.
•The
multi-stage charging capability
ensures that batteries receive the
“best” charge with minimal wear and tear.
• If the PROsine detects “bad” AC voltage, it
switches seamlessly
to Invert
mode and supplies your equipment with pure sine wave power derived
from the batteries. When “good” AC becomes available again, the
inverter•charger allows the AC to pass through to your loads and
automatically begins to recharge the batteries.
Reliable Back-up
If utility-supplied power fails, the PROsine 2.0
automatically detects the failure and instantly becomes an independent power
source that supplies quality AC to your loads. There’s no interruption in
service and no degradation in performance.
To Next Page
Loading...
Need help?
General