Copy Options
ColorQube™ 9301/9302/9303
Copy
15
• 3 Staples = 8x10” SEF, 8.5x11” SEF, 8.5x5.5” LEF, A4 SEF, A5 LEF, 8.5x14” SEF, B5 SEF.
Note SEF is Short Edge Feed and LEF is Long Edge Feed.
•Use the Original Orientation option to select the orientation of the originals being scanned. Select
Portrait or Landscape.
•Use the Paper Supply option to select the output media required.
To achieve some of the staple options, the copy paper will need to be loaded in a specific orientation -
either Long Edge Feed (LEF) or Short Edge Feed (SEF) as shown in this table.
Note For some selections the device will rotate the image. If you are unable to staple, ensure that
Image Rotation is On in Tools. Refer to the Administration and Accounting guide for more
information.
Hole Punching
If your device is equipped with one of the optional Hole Punch kits, either 2 Hole, 3 Hole, 4 Hole,
Swedish 4 Hole or 2 Hole Legal Punch will be available.
• Hole punching can only be selected for A4 LEF, Legal SEF and A3 (8.5x11” LEF, Legal SEF and
11x17” SEF) paper and it can be combined with a stapling option if required.
• Each sheet will be punched individually so there is no limit to the number of pages in the set.
Folding
If the optional Tri-fold Module is installed on your device, A4 or 8.5x11” media in a weight range of 60
to 105 gsm (16 to 28 lb) can be folded in a Single Fold, C Fold or Z Fold. Originals must always be
loaded Short Edge Feed (SEF) and you can select the orientation of your originals - whether the images
are Upright on the page or sideways.
Paper Size and
Orientation
Output Required Original Orientation
Output Tray
Orientation
A4, 8.5x11” LEF LEF A4, 8.5x11”
Single Staple
Top L eft
A4, 8.5x11” SEF SEF A4, 8.5x11”
Single Staple
Top L eft
A4, 8.5x11” SEF SEF A4, 8.5x11”
Single Staple
Bottom Left
To Next Page
Loading...
