Job Status
ColorQube™ 9301/9302/9303
Machine and Job Status
260
Managing Jobs
Manage your Active Jobs using the Job Commands.
• Select the Job Status button on the
control panel.
The Active Jobs list is displayed.
• To access the Job Commands
highlight the required job in the list.
The job command buttons available
depend on the selected job.
• The following options are available:
• Delete removes the selected job
from the list. Any job can be
deleted using the feature,
regardless of the job originator.
• Release is selected if a Secure
Print job has been held in the list
and a passcode is required in order for the job to print.
• Promote is used to move a job to the top of the list. It will be completed after the current job.
• Job Progress displays status information about an individual job.
• Job Details can be accessed for incomplete and completed jobs. Depending on the type of a
selected job, e.g. copy, print, etc, the details show the submission time, image quality settings,
the owner, finishing options, sender’s e-mail address, etc.
Held Jobs
If a job is Held in the list it requires additional resources or a passcode to print.
1. Select the job in the list and select Job
Details, then Required Resources.
To Next Page
Loading...
