EasyManuals Logo

Xerox ColorQube 9303 User Manual

Xerox ColorQube 9303
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #291 background imageLoading...
Page #291 background image
Service Settings
ColorQubeâ„¢ 9301/9302/9303
Administration and Accounting
291
Ring Volume
This setting enables the user to hear a ringing tone from the device when an incoming fax is being
received.
• Enabled instructs the device to sound the tone when a fax is received. Select High, Medium or
Low.
• Disabled deactivates the tone.
Secure Receive
If this option is enabled, a 4 digit passcode is requested. The passcode is then required in order to print
any incoming fax.
• Enable activates Secure Receive, enter a 4-digit passcode to be used to release incoming fax jobs
for printing.
• Disable enables all incoming faxes to print without the passcode.
Default Output Options
If your device is fitted with a finisher you are able to staple, 2 hole punch or 2 side your incoming faxes.
This utility is used to specify the output options you require for all your incoming faxes.
• Staple staples all incoming fax output if enabled.
• Hole Punch prints all incoming faxes on 2 hole punched media if enabled.
• 2-Sided prints all incoming faxes 2-sided if enabled.
Transmission Defaults
Use these options to set the fax sending
defaults.
Automatic Redial Setup
If the device cannot make contact with the
destination fax machine, it automatically
waits and redials later. Use this setting to
specify the interval between unsuccessful
attempts and the number of times the
device redials.
• Redial Time Interval is used to
specify the time interval between redials for a failed transmission. Between 1 and 25 minutes can
be entered.
• Automatic Redial Attempts instructs the device how many times to redial the remote fax
machine before rejecting the job. Between 0 and 14 attempts can be entered.

Table of Contents

Other manuals for Xerox ColorQube 9303

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox ColorQube 9303 and is the answer not in the manual?

Xerox ColorQube 9303 Specifications

General IconGeneral
Dimensions (WxDxH)1398 x 722 x 1156 mm
Networking featuresGigabit Ethernet
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionsprint, scan
Duplex printingYes
Print technologyInkjet
Maximum resolution600 x 600 DPI
Time to first page (black, normal)7.2 s
Print speed (black, normal quality, A4/US Letter)60 ppm
Print speed (color, normal quality, A4/US Letter)55 ppm
Digital senderNo
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle300000 pages per month
Number of print cartridges4
Page description languagesPCL 5c, PCL 6, PostScript 3
Time to first copy (black, normal)8.2 s
Copy speed (black, normal quality, A4)60 cpm
Copy speed (color, normal quality, A4)55 cpm
Scan toE-mail, FTP, Image, USB
Scan speed (black)84 ppm
Image formats supportedJPG
Optical scanning resolution- DPI
Total input capacity3300 sheets
Total output capacity- sheets
Maximum input capacity7300 sheets
Paper tray 2 input capacity550 sheets
Auto document feeder (ADF) input capacity100 sheets
Maximum print size320 x 457 mm
Paper tray media typesPlain paper
ISO A-series sizes (A0...A9)A4
Display-
Control typeTouch
Market positioningBusiness
Standard interfacesEthernet, USB 2.0
Internal storage capacity160 GB
Power consumption (average operating)- W
FaxingMono faxing

Related product manuals