Xerox ColorQube 9303 - Print from USB

Print from USB
ColorQube™ 9301/9302/9303
USB Port
214
Print from USB
You can print PDF, TIFF, JPEG, XPS and other print ready files directly from a USB Flash Drive.
Note The system administrator must set up this feature before you can use it. Refer to the System
Administrator Guide for instructions.
To print from a USB Flash Drive:
1. Insert your USB Flash Drive into the USB port located on the left side of the device.
The USB Drive Detected screen appears.
2. Select Print from USB. The Print
From... options are displayed.
3. Select the folder required and the
print ready job required.
If necessary, use the Up and Down
buttons to scroll through the list until
the folder or job is displayed.
4. Select the features required for your
job:
• Paper Supply use to select the
paper source or select Auto for
the device to choose a suitable
paper supply.
• 2-Sided Printing use to select 1
or 2 sided output, or select Auto
for the device to choose an
appropriate option.
• Finishing use to select a specific
finishing option for the output, or select Auto for the device to choose an appropriate option.
5. Select the Quantity box and enter the number of copies required using the numeric keypad.
6. Press Start to print the job.
7. The Job Progress screen is displayed. Select Job Status to view status information or use Program
Next Job to run a different job.
When you have finished printing, remove the USB Flash Drive from the USB port.