Fax Options
ColorQube™ 9301/9302/9303
Fax
66
Starting Rate
Use Starting Rate to select the speed at which the device starts transmitting your fax job. A high
starting rate should be used in good transmission areas, and a low rate in poor quality areas. The
options are:
Super G3 (33.6 Kbps)
• Determines the transmission rate to
be used based on the maximum
capabilities of the receiving fax
machine.
• This rate minimizes transmission
errors by using Error Correction Mode
(ECM). Initial transmission speed is
33,600 Bits Per Second (bps).
G3 (14.4 Kbps)
• Selects the transmission rate based
on the maximum capabilities of the receiving fax machine.
• Initial transmission speed is 14,400 Bits Per Second (bps). This rate minimizes transmission errors
by using Error Correction Mode (ECM).
Forced (4800 bps)
• Used in areas of low quality communication, when experiencing telephone noise, or when fax
connections are susceptible to errors.
• Forced 4800 bps is a slower transmission rate but is less susceptible to errors. In some regional
areas the use of Forced 4800 bps is restricted.
Select Save to save your selections and exit.
To Next Page
Loading...
