Xerox ColorQube 9303 - Introduction

Introduction
ColorQube™ 9301/9302/9303
Server Fax
80
Introduction
Server Fax is a standard feature that can
be enabled. If enabled, it is selected by
pressing the Services Home button, then
the Server Fax option.
Server Fax scans your documents and
sends them to any type of fax machine
that is connected to a telephone network.
Your images are sent from your device to a
Third Party fax server, which relays them
over the telephone network to the fax
number of your choice.
This means that your fax transmissions
are controlled by the server, which may
limit your faxing options. For example,
the server may be set-up to collect and
send all faxes at off peak times.
Most feature screens include these
buttons to confirm or cancel your
choices.
• Undo resets the current screen to
the values that were displayed when
the screen was opened.
• Cancel resets the screen and returns to the previous screen.
• Save saves the selections made and returns to the previous screen.
• Close closes the screen and returns to the previous screen.
Instructions for sending a server fax and using the basic features are provided in ColorQube™
9301/9302/9303 How To Sheets. If Authentication or Accounting has been enabled on your device,
you may have to enter log in details to access the features, refer to Log In / Out on page 92.