Xerox ColorQube 9303 - Special Pages; Add Covers

Special Pages
ColorQube™ 9301/9302/9303
Print
134
Special Pages
The Special Pages tab enables you to add, modify, or delete cover pages, inserts, or exception pages.
The table provides a summary of the
special pages for your print job. Up to 250
inserts and exception pages can be
included in the table. You can change the
width of the columns in the table.
To edit, delete or move an entry in the
table use the following buttons:
• Edit you can select single or
multiple entries and use this button to
change the properties for the selected
entries.
• Delete is used to delete an
individual entry or a selection of
entries.
• Delete All is used to delete all the
entries in the table.
• Undo is used to undo the last
actions if you make an error.
• Up and Down are used to move the entries up or down in the table.
Some features are only supported by specific printer configurations, operating systems, or driver types.
You may see more features or options listed than your specific device supports.
Add Covers
Use this option to add blank or printed covers to your printed document.
1. To add a cover select the Add Covers button above the
table.
2. Select the Cover Options required:
• Front Only provides a front cover.
• Back Only provides a back cover.
• Front and Back: Same provides a front and back
cover with the same settings, on the same media.
• Front and Back: Different provides a front and back
cover with individual programing requirements and on different media if required.
3. Select the Paper Settings for the selected cover options.