EasyManuals Logo

Xerox ColorQube 9303 User Manual

Xerox ColorQube 9303
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #239 background imageLoading...
Page #239 background image
Trays 1 and 2
ColorQube™ 9301/9302/9303
Paper and Media
239
Trays 1 and 2
Trays 1 and 2 are located on the front of the device and feed the majority of media sizes. Media can be
loaded Long Edge Feed (LEF) or Short Edge Feed (SEF). Your device uses a system of programable
settings to manage the trays and media. These settings are established by your System Administrator
who can set Trays 1 and 2 to Fully Adjustable or Dedicated.
Fully Adjustable if this option is set, the paper settings screen is displayed each time the tray is
opened and closed. The drop-down menus are used to change the size, type and color of the
media loaded. The guides automatically detect the size of media loaded and the device gives a
warning if the guides are not set correctly or a non-standard media size is used.
Dedicated when a tray is opened a screen is displayed identifying the media that should be
loaded in the tray. If the wrong size of media is loaded, or the tray guides are set incorrectly, the
device gives a warning to adjust the guides.
Note Only the System Administrator can change the media attributes for a dedicated tray.
If a non-standard size media is loaded, or the tray guides are set incorrectly, the device displays a
screen showing Unknown size and asking you to confirm or change the settings.
If set to Adjustable, the following media can be loaded in Trays 1 and 2:
Up to 550 sheets of 75 gsm or 20 lb paper.
Weights from 60 to 216 gsm (16 to 56 lb).
Media sizes in the range A5 SEF to A3 SEF (5.5x8.5” SEF to 11x17” SEF).
•Media types:
Bond, standard or recycled paper
•Card
•Pre-printed media
•Labels
Hole punched paper
Carbonless paper
Trays 1 and 2 must not be used to feed transparencies, envelopes or tabs. Tray 4 (Bypass Tray) can be
used for these media types.
Note For 80 gsm paper capacities are slightly lower then specified.

Table of Contents

Other manuals for Xerox ColorQube 9303

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox ColorQube 9303 and is the answer not in the manual?

Xerox ColorQube 9303 Specifications

General IconGeneral
Dimensions (WxDxH)1398 x 722 x 1156 mm
Networking featuresGigabit Ethernet
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionsprint, scan
Duplex printingYes
Print technologyInkjet
Maximum resolution600 x 600 DPI
Time to first page (black, normal)7.2 s
Print speed (black, normal quality, A4/US Letter)60 ppm
Print speed (color, normal quality, A4/US Letter)55 ppm
Digital senderNo
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle300000 pages per month
Number of print cartridges4
Page description languagesPCL 5c, PCL 6, PostScript 3
Time to first copy (black, normal)8.2 s
Copy speed (black, normal quality, A4)60 cpm
Copy speed (color, normal quality, A4)55 cpm
Scan toE-mail, FTP, Image, USB
Scan speed (black)84 ppm
Image formats supportedJPG
Optical scanning resolution- DPI
Total input capacity3300 sheets
Total output capacity- sheets
Maximum input capacity7300 sheets
Paper tray 2 input capacity550 sheets
Auto document feeder (ADF) input capacity100 sheets
Maximum print size320 x 457 mm
Paper tray media typesPlain paper
ISO A-series sizes (A0...A9)A4
Display-
Control typeTouch
Market positioningBusiness
Standard interfacesEthernet, USB 2.0
Internal storage capacity160 GB
Power consumption (average operating)- W
FaxingMono faxing

Related product manuals