Xerox ColorQube 9303 - Finishing Devices

Copy Options
ColorQube™ 9301/9302/9303
Copy
17
Finishing Devices
Your device is equipped with one of the following finishing devices:.
Note Thick stacks of paper can be removed from your finisher
more easily by using the pause function. Press the button as
shown to lower the stacker tray to a more convenient height.
Then press the button again to return the stacker tray to normal
height. Alternatively, it automatically resets after 30 seconds.
High Volume Finisher: The High Volume Finisher
has a comprehensive range of finishing options.
It collates, offsets, stacks and staples your
output. The top tray can receive up to 250 sheets
of paper and the stacker tray up to 3000 sheets
of paper. This finisher can be fitted with the
optional 2, 3 or 4 Hole-Punch kit and the Tray 6
(Post Process Inserter) kit.
Tray 6 (Post Process Inserter): This optional
accessory is a feeder that sits on top of the
finisher unit. It enables pre-printed sheets to be
inserted into sets created by your device. The
inserted sheets do not go through the copy or
print process in the device. For more information
about using Tray 6 (Inserter) refer to the Paper
and Media guide.
Booklet Maker: The High Volume Finisher is also
available with a Booklet Maker which enables
booklets to be folded and stapled. Folded sheets
and booklets are delivered to the booklet tray
which can hold between 10 and 30 booklets,
depending upon the number of pages. If the flap
on the right of the tray is folded down, an
unlimited number of booklets can be collected in
a suitable container.
Office Finisher: This finisher is capable of
receiving up to 250 sheets of paper in the top
tray and up to 2000 sheets of paper in the
stacker tray. The Office Finisher can be fitted
with the optional 2, 3 or 4 Hole-Punch Kit.
Tri-fold Module: If you have a High Volume
Finisher with Booklet Maker, a Tri-fold module
can also be fitted. This enables your device to tri-
fold booklets. With the Tri-fold module fitted, the
capacity of the finisher stacker tray is reduced to
2000 sheets. Refer to Folding on page 15 for
information about the folding options.
Offsetting Catch Tray (OCT): The Offsetting
Catch Tray holds up to 500 sheets of 80 gsm (20
lb) paper and is located on the right-hand side of
the device.
5
6
1
2
4
3
1
4
2
5
3
6