EasyManuals Logo

Xerox ColorQube 9303 User Manual

Xerox ColorQube 9303
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #275 background imageLoading...
Page #275 background image
Device Settings
ColorQube™ 9301/9302/9303
Administration and Accounting
275
Paper Substitution
Enables the device to automatically
substitute common US and metric paper
sizes when printing.
Nearest Match is used to
automatically substitute the paper
sizes shown on the screen if they are
not available e.g. if an A4 document is
received for printing and only 8.5x11"
paper is available, the device
substitutes 8.5x11" for A4. If Disable
is selected the device does not
substitute the sizes shown. In this
instance, a job would be held in the job list until the correct paper size is loaded.
Replace 8.5 x 14” is used to automatically substitute 8.5x14” paper with A3 or 11x17” if 8.5x14”
paper is requested but is not available. If Disable is selected the device does not substitute the
paper.
Paper Size Preference
This option is used to select the most frequently used paper size formats.
Inches for formats such as 8.5x11” or 11x17”.
Metric for formats such as A4 or A3.
Tray Settings
Use to apply attributes to each paper tray
so they operate productively in your own
working environment. You can assign trays
as dedicated to a specific paper size and
type, and setup Auto Selection and the
selection Priority of each tray.
Select the tray required and select
Change Settings.
Select the Tray Type required:
Dedicated is set to contain one
size and type of media only and
cannot be adjusted by the user.
Adjustable is selected if the tray can be adjusted by the user to contain any media within
specification. This option may not be available for all trays.
Select the setting required and select Save.
Priority is used to indicate which tray is selected if trays contain the same media, it also
determines in which order the trays are displayed on the Copy tab. Set the Tray Priority between 1
- 99. 1 is the highest priority and 99 is the lowest. Select Save.

Table of Contents

Other manuals for Xerox ColorQube 9303

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox ColorQube 9303 and is the answer not in the manual?

Xerox ColorQube 9303 Specifications

General IconGeneral
Dimensions (WxDxH)1398 x 722 x 1156 mm
Networking featuresGigabit Ethernet
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionsprint, scan
Duplex printingYes
Print technologyInkjet
Maximum resolution600 x 600 DPI
Time to first page (black, normal)7.2 s
Print speed (black, normal quality, A4/US Letter)60 ppm
Print speed (color, normal quality, A4/US Letter)55 ppm
Digital senderNo
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle300000 pages per month
Number of print cartridges4
Page description languagesPCL 5c, PCL 6, PostScript 3
Time to first copy (black, normal)8.2 s
Copy speed (black, normal quality, A4)60 cpm
Copy speed (color, normal quality, A4)55 cpm
Scan toE-mail, FTP, Image, USB
Scan speed (black)84 ppm
Image formats supportedJPG
Optical scanning resolution- DPI
Total input capacity3300 sheets
Total output capacity- sheets
Maximum input capacity7300 sheets
Paper tray 2 input capacity550 sheets
Auto document feeder (ADF) input capacity100 sheets
Maximum print size320 x 457 mm
Paper tray media typesPlain paper
ISO A-series sizes (A0...A9)A4
Display-
Control typeTouch
Market positioningBusiness
Standard interfacesEthernet, USB 2.0
Internal storage capacity160 GB
Power consumption (average operating)- W
FaxingMono faxing

Related product manuals