Xerox ColorQube 9303 User Manual

Service Settings
ColorQube™ 9301/9302/9303
Administration and Accounting
290
Line 2 Setup
If the Extended Fax option is installed the device can support two analogue fax lines. This option
enables you to set up Line 2.
• Fax Number is the number of the phone line your system is attached to. Enter the number for Line
2 using the numeric keypad.
• Line Name is a friendly name to logically identify the system. Enter the name using the keyboard
provided. Use the backspace key to delete an incorrect character, or use Delete Text to delete the
entire entry. Select Save.
• Options determine whether the line is able to Send and Receive, Send Only or Receive Only.
Select the required option for the fax line.
Incoming Fax Defaults
This setting allows you to select the
default options for incoming faxes.
Auto Answer Delay
This setting allows you to set a time delay
before the device responds to a call. This is
particularly useful if the device is attached
to a shared telephone line.
• Enter the time delay required,
between 0 and 15 seconds.
Junk Fax Prevention
This setting enables you to prevent the receipt of unwanted (junk) faxes. This is done by only allowing
the receipt of faxes from numbers held in the individual directory.
• Disabled switches off the Junk Fax Prevention option.
• Enabled allows faxes sent from numbers held in the individual directory to be received.
Paper Settings
This setting determines whether an incoming fax is printed onto media that is selected automatically
by the device according to the parameters of the fax, or specified manually within this feature.
• Automatic allows the device to automatically select a paper size for incoming faxes. If an exact
match is not available, the incoming fax is printed on the next best match available and may be
reduced to fit.
• Manual enables you to select the paper selection option required.
• Paper Size is used to select a Normal paper size for all incoming faxes, or Other
• Paper Type & Color is used to program the type and color of media required for incoming
faxes.
• Fit to Paper allows you to select Reduce to Fit if all faxes require reducing or enlarging to fit
the paper selected.

Xerox ColorQube 9303 Specifications

General

Dimensions (WxDxH)	1398 x 722 x 1156 mm
Networking features	Gigabit Ethernet
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	print, scan
Duplex printing	Yes
Print technology	Inkjet
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	7.2 s
Print speed (black, normal quality, A4/US Letter)	60 ppm
Print speed (color, normal quality, A4/US Letter)	55 ppm
Digital sender	No
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	300000 pages per month
Number of print cartridges	4
Page description languages	PCL 5c, PCL 6, PostScript 3
Time to first copy (black, normal)	8.2 s
Copy speed (black, normal quality, A4)	60 cpm
Copy speed (color, normal quality, A4)	55 cpm
Scan to	E-mail, FTP, Image, USB
Scan speed (black)	84 ppm
Image formats supported	JPG
Optical scanning resolution	- DPI
Total input capacity	3300 sheets
Total output capacity	- sheets
Maximum input capacity	7300 sheets
Paper tray 2 input capacity	550 sheets
Auto document feeder (ADF) input capacity	100 sheets
Maximum print size	320 x 457 mm
Paper tray media types	Plain paper
ISO A-series sizes (A0...A9)	A4
Display	-
Control type	Touch
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
Internal storage capacity	160 GB
Power consumption (average operating)	- W
Faxing	Mono faxing