Error Messages and Codes 3-5
POST Error Reporting Blink Pattern Definition Table
Control
Panel
Error
Code
PS, PE and
Control
Panel LEDs
POST
Error
Type Description
01.01 Flutter then
01 blinks
Hard Bad error code.
02.01 Flutter then
02 blinks
Hard Failed machine check.
02.02 Flutter then
02 blinks
Hard System panic.
03.01 Flutter only Soft ID read failure.
03.02 Flutter then
03 blinks
Hard Mismatch.
03.03 Flutter only. Soft Version mismatch.
03.04 Flutter then
03 blinks
Hard Access failure.
04.01 Flutter and
then 04 blinks
Hard ID read failure.
04.02 Flutter and
then 04 blinks
Hard ID mismatch.
04.03 Flutter and
then 04 blinks
Hard TMVL mismatch, write/read failed.
04.04 Flutter and
then 04 blinks
Hard TMVH mismatch, write/read failed.
05.01 Flutterand
then 05 blinks
Hard Communications error. PLD I/O Board serial,
link down/bad parity.
05.02 Flutter only Soft Communications error. PLD I/O Board serial,
mismatch.
6.08 N/A Soft IDE drive general failure. Reseat IDE cable and
power cable. If problem persists, replace the
IDE drive. The system will work without the IDE
drive.
07.01 Flutter only Soft Control panel link is invalid or bad parity.
07.02 Flutter only Soft Control panel version mismatch.
08.01 Flutter only Soft Control panel failed to initialize, POST soft error.
09.01 Flutter only Soft Control panel data path failure, bad data
returned.
10.01 Flutter and
then 10 blinks
Hard PLD power control link down.
To Next Page
Loading...
Need help?
General