Yamaha 30D - Gear Oil Level; Operation of Controls and Moving Parts

3-7
INSP
ADJ
E
PREDELIVERY SERVICE
D23000-0
GEAR OIL LEVEL
Remove the oil-drain plug 1 and oil-level
plug 2 and add the specified gear oil
through the oil-drain hole until it overflows
from the oil-level hole. Re-fit the plugs. (The
oil level plug first).
NOTE:
Be sure the motor is positioned straight up
when checking the oil level.
D23502-1
OPERATION OF CONTROLS AND
MOVING PARTS
1. Check for correct operation of the shift
control.
2. Check for correct operation of the tilt-
lock mechanism.
3. Check for smooth operation of the
steering control.
4. Check for smooth operation of the
throttle control.
5. Check for correct operation of the spark
advancer.
6. Check for correct operation of the choke
system.
7. Noting the following WARNING and
CAUTION, check for correct operation
of the starting system.
WARNING
Before attempting to check the starter sys-
tem, replace the propeller with the speci-
fied test propeller, and make the tests with
the motor placed in a test tank.
CAUTION:
Use a 50:1 fuel mixture to start the engine.
8. Check for correct operation of the
engine stop system.