Yamaha 30D - Cylinder Head Bolts, Engine Mounting Bolts, and Flywheel Nut; Gear Oil; Oil-Injection Pump; Operational Test

3-11
INSP
ADJ
E
PERIODIC SERVICE
D32000-0
CYLINDER HEAD BOLTS, ENGINE
MOUNTING BOLTS, AND FLYWHEEL
NUT
1. Retighten to specifications.
2. Check other fixings and tighten if neces-
sary.
D32300-0
FUEL FILTER
Clean the strainer of dust and impurities.
D32600-0
FUEL LINE
Check the fuel line for leaks.
D32902-0
GEAR OIL
1. Drain the gear oil thoroughly, and pour
in new oil.
2. Check for water or metallic sediment in
the drained oil.
D34002-2
OIL-INJECTION PUMP
Operational test
1. Start the engine, and set the idling
speed at 1,500 rpm by adjusting the
throttle-stop lever.
CAUTION:
Use a 50:1 fuel mixture to start the engine.
Gear oil capacity:
200 cm
3
(6.76 US oz, 7.04 Imp oz)