9.3 Monitoring Machine Operation Status and Signal Waveforms
9.3.3 Using a Measuring Instrument
9-12
• Gain Adjustment
Operating Procedure
Use the following procedure.
1.
Select Setup - Adjust Offset from the menu bar of the Main Window of the SigmaWin+.
The Adjust the Analog Monitor Output Dialog Box will be displayed.
2.
Click the Zero Adjustment or Gain Adjustment Tab.
Tool Function Operating Procedure Reference
Panel Operator Fn00D
13.4.12 Adjust Analog Monitor Output Gain
(Fn00D) on page 13-19
Digital Operator Fn00D
Σ-7-Series Digital Operator Operating Manual
(Manual No.: SIEP S800001 33)
SigmaWin+ Setup - Adjust Offset
Operating Procedure on page 9-12
To Next Page
Loading...
