8.4 Replace Cooling Fans and Circulation Fans
440 YASKAWA SIEPC71061737D GA800 Drive Technical Reference
■ Fan Installation
Reverse the removal procedure for fan installation.
1. Connect the relay connectors between the drive and cooling fans.
Figure 8.16 Connect the Relay Connectors
2. Align the notches on the fans with the pins on the drive and install the cooling fans in the drive.
A - Notch on fan
B - Alignment pins on drive
C - Front of drive
Figure 8.17 Install the Cooling Fans
3. Put the cables and connectors in the recess of the drive.
A - Front of drive B - Space for cables
*1
Figure 8.18 Put the Cables and Connectors in the Drive Recess
*1 Make sure that the cables and connectors are in the correct space.
To Next Page
Loading...
