2.7 Install the Keypad in a Control Panel or Another Device
50 YASKAWA SIEPC71061737D GA800 Drive Technical Reference
A - Keypad
B - Mounting bracket A
C - M3 screws
D - Screw mounting holes
Figure 2.17 Attach Keypad to Mounting Bracket
4. Put the mounting bracket that has the attached keypad in the control panel, and use the screws to attach it
from the outside.
Use the screws included with the installation support set to attach it. Tighten the screws to a correct tightening
torque:
• M4 screws: 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
A - M4 screws B - Enclosure panel
Figure 2.18 Mount Mounting Bracket to the Interior of the Control Panel
To Next Page
Loading...
