Parameter List
11
11.4 A: Initialization Parameters
YASKAWA SIEPC71061737D GA800 Drive Technical Reference 541
No.
(Hex.)
Name Description
Default
(Range)
Ref.
A2-28
(0121)
User Parameter 28
Sets the parameter number to be shown for number 28 of the [User Custom Parameters]
under the main menu. You can select a maximum of 32 parameters for the drive and set
them to parameters A2-01 to A2-32. You can set A2-17 to A2-32 when A2-33 = 0 [User
Parameter Auto Selection = Disabled: Manual Entry Required].
-
(Determined by A1-06)
715
A2-29
(0122)
User Parameter 29
Sets the parameter number to be shown for number 29 of the [User Custom Parameters]
under the main menu. You can select a maximum of 32 parameters for the drive and set
them to parameters A2-01 to A2-32. You can set A2-17 to A2-32 when A2-33 = 0 [User
Parameter Auto Selection = Disabled: Manual Entry Required].
-
(Determined by A1-06)
715
A2-30
(0123)
User Parameter 30
Sets the parameter number to be shown for number 30 of the [User Custom Parameters]
under the main menu. You can select a maximum of 32 parameters for the drive and set
them to parameters A2-01 to A2-32. You can set A2-17 to A2-32 when A2-33 = 0 [User
Parameter Auto Selection = Disabled: Manual Entry Required].
-
(Determined by A1-06)
715
A2-31
(0124)
User Parameter 31
Sets the parameter number to be shown for number 31 of the [User Custom Parameters]
under the main menu. You can select a maximum of 32 parameters for the drive and set
them to parameters A2-01 to A2-32. You can set A2-17 to A2-32 when A2-33 = 0 [User
Parameter Auto Selection = Disabled: Manual Entry Required].
-
(Determined by A1-06)
715
A2-32
(0125)
User Parameter 32
Sets the parameter number to be shown for number 32 of the [User Custom Parameters]
under the main menu. You can select a maximum of 32 parameters for the drive and set
them to parameters A2-01 to A2-32. You can set A2-17 to A2-32 when A2-33 = 0 [User
Parameter Auto Selection = Disabled: Manual Entry Required].
-
(Determined by A1-06)
715
A2-33
(0126)
User Parameter Auto
Selection
Sets the automatic save feature for changes to parameters A2-17 to A2-32 [User
Parameters 17 to 32].
0 : Disabled: Manual Entry Required
1 : Enabled: Auto Save Recent Parms
Determined by A1-06
(0, 1)
715
To Next Page
Loading...
