Yealink SIP-T2 Series

Setting Up Your System
79
Configure the IPv6 static DNS address.
Parameters:
static.network.ipv6_primary_dns
static.network.ipv6_secondary_dns
<y0000000000xx>.cf
g
Configure the IPv6 static DNS.
Parameter:
static.network.ipv6_static_dns_enable
Web User Interface
Configure the IPv6 address assignment
method.
Configure the IPv6 static DNS address.
Configure the IPv6 static DNS.
Navigate to:
http://<phoneIPAddress>/servlet?p=net
work&q=load
Phone User Interface
Configure the IPv6 address assignment
method.
Configure the IPv6 static DNS address.
Configure the IPv6 static DNS.
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
static.network.ip_address_mode
0, 1 or 2
0
Description:
Configures the IP address mode.
0-IPv4
1-IPv6
2-IPv4 & IPv6
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->Internet Port->Mode (IPv4/IPv6)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IP Mode
static.network.ipv6_internet_port.type
0 or 1
0