To Next Page

To Previous Page

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones

290

If you leave this field blank or enter 0, the area code rule will apply to all accounts on the IP

phone.

4. Click Confirm to accept the change.

Block Out

Block out rule prevents users from dialing out specific numbers. When entered numbers match

the predefined block out rule, the LCD screen prompts “Forbidden Number”. IP phones support

up to 10 block out rules.

Procedure

Block out rule can be created using the following methods.

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Create the block out rule for the IP

phone.

Parameters:

dialplan.block_out.number.X

dialplan.block_out.line_id.X

Web User Interface

Create the block out rule for the IP

phone.

Navigate to:

http://<phoneIPAddress>/servlet?p

=settings-blackout&q=load

Details of Configuration Parameters:

Parameters

Permitted Values

Default

dialplan.block_out.number.X

(X ranges from 1 to 10)

String within 32 characters

Blank

Yealink SIP-T2 Series User Manual

Other manuals for Yealink SIP-T2 Series