Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
798
2. Select the desired value from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
Dual Headset
Dual headset allows users to use two headsets on one IP phone. To use this feature, users need
to physically connect two headsets to the headset and handset jacks respectively. Once the IP
phone connects to a call, the user with the headset connected to the headset jack has
full-duplex capabilities, while the user with the headset connected to the handset jack is only
able to listen.
Note
Procedure
Dual headset can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure dual headset.
Parameter:
features.headset_training
Web User Interface
Configure dual headset.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-general&q=load
Dual headset is not applicable to the Bluetooth headset.