Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
752
Parameters
Permitted Values
Default
None
Phone User Interface:
None
The Enhanced DSS Keys (EDK) Prompt parameters must be used if interactivity with user is
implemented as part of any macro.
Procedure
EDK prompt can be configured using the configuration files.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure EDK prompt.
Parameters:
edk.edkprompt.X.enable
edk.edkprompt.X.label
edk.edkprompt.X.type
edk.edkprompt.X.userfeedback
Details of Configuration Parameters:
Parameters
Permitted Values
Default
edk.edkprompt.X.enable
(X ranges from 1 to 10)
0 or 1
0
Description:
Enables or disables Enhanced DSS Keys (EDK) prompt X.
0-Disabled
1-Enabled
Note: If a macro attempts to use an EDK prompt that is disabled, the macro execution will
be ignored. It works only if the value of the parameter “features.enhanced_dss_keys.enable”
is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
edk.edkprompt.X.label
String
Blank

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English