Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
224
4. Select the desired value from the pull-down list of Call Information Display Method.
5. Click Confirm to accept the change.
Display Method on Dialing
When the IP phone is on the pre-dialing or dialing screen, the account information will be
displayed on the top left corner of the LCD screen.
You can customize the account information to be displayed on the IP phone as required. IP
phones support three account information display methods: Label, Display Name or User Name.
Procedure
Display method on dialing can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure display method on dialing.
Parameter:
features.caller_name_type_on_dialing
Web User Interface
Configure display method on dialing.
Navigate to:
http://<phoneIPAddress>/servlet?p=fe
atures-general&q=load

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English