Yealink SIP-T2 Series User Manual

Configuring Audio Features
793
Parameter
Permitted Values
Default
Description:
Enables or disables the IP phone to play a warning tone when it receives a new voice mail.
0-Disabled
1-Enabled
Web User Interface:
Features->General Information->Voice Mail Tone
Phone User Interface:
None
To configure voice mail tone via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Voice Mail Tone.
3. Click Confirm to accept the change.
Ringer Device for Headset
The IP phones support either or both speaker and headset ringer devices. Ringer Device for
Headset feature allows users to configure which ringer device to be used when receiving an
incoming call. For example, if the ringer device is set to Headset, ring tone will be played
through your headset.
If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset or
Bluetooth headset) should be connected to the IP phone and the headset mode also should be
activated in advance. You can press the HEADSET key to activate the headset mode. For more
information, refer to the Yealink phone-specific user guide .

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English