Yealink SIP-T2 Series User Manual

Configuring Basic Features
321
Parameters
Permitted
Values
Default
None
static.auto_provision.local_calllog.backup.path
String
Blank
Description:
Configures a path or URL for the IP phone to upload/download the <MAC>-calllog.xml file.
If it is left blank, the IP phone connects to the provisioning server URL, and
uploads/downloads the contact file “<MAC>-calllog.xml”.
Example:
static.auto_provision.local_calllog.backup.path = http://192.168.1.20/calllog
Once the call logs update, the IP phone will upload the call log file to the specified path
“http://192.168.1.20/calllog”.
During the auto provisioning process, the IP phone downloads the call log file
“<MAC>-calllog.xml” from the specified path “http://192.168.1.20/calllog”.
Note: It works only if the value of the parameter
“static.auto_provision.local_calllog.backup.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
static.auto_provision.local_calllog.write_delay.terminated
Integer from
10 to 600
60
Description:
Configures the delay time (in seconds) for the IP phone to upload the <MAC>-calllog.xml
file each time the call logs update.
Note: It works only if the value of the parameter
“static.auto_provision.local_calllog.backup.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
Call List Show Number
Call list show number allows the IP phone to show the phone number instead of the name in the
call log list. To use this feature, make sure the save call log feature is enabled. For more
information on save call log, refer to Save Call Log on page 318.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English