Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
792
If you select Custom, you can customize a tone for each condition of the IP phone.
3. Click Confirm to accept the change.
Voice Mail Tone
Voice mail tone feature allows the IP phone to play a warning tone when receiving a new voice
mail. You can customize the warning tone or select specialized tone sets (vary from country to
country) for your IP phone. For more information, refer to Tones on page 784.
Procedure
Voice mail tone can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure whether to play a warning
tone when the IP phone receives a
new voice mail.
Parameter:
features.voice_mail_tone_enable
Web User Interface
Configure whether to play a warning
tone when the IP phone receives a
new voice mail.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.voice_mail_tone_enable
0 or 1
1