Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
442
2. Select the desired values from the pull-down lists of Semi-Attended Transfer, Blind
Transfer on Hook and Attended Transfer on Hook.
3. Click Confirm to accept the change.
Local Conference
Local conference requires a host phone to process the audio of all parties. Yealink IP phones
support up to 3 parties (including yourself) in a local conference call.
Procedure
Local conference can be configured using the configuration files.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure local conference.
Parameter:
features.conference.local.enable
Details of Configuration Parameter:
Parameter
Permitted Values
Default
features.conference.local.enable
0 or 1
1
Description:
Enables or disables the local conference for the IP phone.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the Conf/Conference soft key will disappear from the talking
screen and the CONF key/conference key (the DSS key is configured as Conference) will not
work. You cannot create a conference with other two parties using the phone’s local
conference even though the value of the parameter “account.X.conf_type” is set to 0 (Local
Conference).
If it is set to 1 (Enabled), to create a conference, you have to configure the value of the
parameter “account.X.conf_type” to 0 (Local Conference).