Yealink SIP-T2 Series User Manual

Configuring Basic Features
443
Parameter
Permitted Values
Default
Note: The CONF key is only applicable to SIP-T29G/T27P/T27G IP phones.
Web User Interface:
None
Phone User Interface:
None
Network Conference
Network conference, also known as centralized conference, provides users with flexibility of call
with multiple participants (more than three). IP phones implement network conference using the
REFER method specified in RFC 4579. This feature depends on support from a SIP server.
Procedure
Network conference can be configured using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure network conference.
Parameters:
account.X.conf_type
account.X.conf_uri
Web User Interface
Configure network conference.
Navigate to:
http://<phoneIPAddress>/servlet?p
=account-adv&q=load&acc=0
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.conf_type
0 or 2
0
Description:
Configures the network conference type for account X.
0-Local Conference
2-Network Conference
If it is set to 0 (Local Conference), conferences are set up on the IP phone locally.
If it is set to 2 (Network Conference), conferences are set up by the server.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English