Yealink SIP-T2 Series User Manual

Setting Up Your System
59
5. Enter the desired HTTPS port number in the HTTPS Port(1~65535) field.
6. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
7. Click OK to reboot the phone.
To configure web server type via phone user interface:
1. Press Menu->Advanced (default password: admin) ->Network->Web Server.
2. Press or , or the Switch soft key to select the desired value from the HTTP Status
field.
3. Enter the desired HTTP port number in the HTTP Port field.
4. Press or , or the Switch soft key to select the desired value from the HTTPS
Status field.
5. Enter the desired HTTPS port number in the HTTPS Port field.
6. Press the Save soft key to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
7. Click OK to reboot the phone.
Wi-Fi feature enables users to connect their phones to the organization’s wireless network. The
wireless network is more convenient and cost-effective than wired network. Wi-Fi feature is only
applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
When the Wi-Fi feature is enabled, the IP phone will automatically scan the available wireless
networks. All the available wireless networks will display in scanning list on the LCD screen. You

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English