Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
58
Parameters
Permitted Values
Default
Web User Interface:
Network->Advanced->Web Server->HTTPS
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTPS Status
static.network.port.https
Integer from 1 to 65535
443
Description:
Configures the HTTPS port for the user to access web user interface of the IP phone using
the HTTPS protocol.
Note: Please take care when choosing an alternate port. If you change this parameter, the IP
phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Web Server->HTTPS Port(1~65535)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTPS Port
To configure web server type via web user interface:
1. Click on Network->Advanced.
2. Select the desired value from the pull-down list of HTTP.
3. Enter the desired HTTP port number in the HTTP Port(1~65535) field.
4. Select the desired value from the pull-down list of HTTPS.