Yealink SIP-T2 Series

Setting Up Your System
57
Phone User Interface
Configure the web access type, HTTP
port and HTTPS port.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
static.wui.http_enable
0 or 1
1
Description:
Enables or disables the user to access web user interface of the IP phone using the HTTP
protocol.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Web Server->HTTP
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Status
static.network.port.http
Integer from 1 to 65535
80
Description:
Configures the HTTP port for the user to access web user interface of the IP phone using the
HTTP protocol.
Note: Please take care when choosing an alternate port. If you change this parameter, the IP
phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Web Server->HTTP Port(1~65535)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Port
static.wui.https_enable
0 or 1
1
Description:
Enables or disables the user to access web user interface of the IP phone using the HTTPS
protocol.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take effect.