Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
56
When you enable user to access web user interface of the IP phone using the HTTP/HTTPS
protocol (take HTTPS protocol for example):
When you disable user to access web user interface of the IP phone using the HTTP/HTTPS
protocol (take HTTPS protocol for example):
Procedure
Web server type can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the web access type, HTTP
port and HTTPS port.
Parameters:
static.wui.http_enable
static.network.port.http
static.wui.https_enable
static.network.port.https
Web User Interface
Configure the web access type, HTTP
port and HTTPS port.
Navigate to:
http://<phoneIPAddress>/servlet?p=
network-adv&q=load