Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
204
Procedure
SIP Account registration can be configured using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure the SIP account registration
information.
Parameters:
account.X.enable
account.X.label
account.X.display_name
account.X.auth_name
account.X.user_name
account.X.password
account.X.sip_server.Y.address
account.X.sip_server.Y.port
account.X.outbound_proxy_enable
account.X.outbound_proxy.Y.address
account.X.outbound_proxy.Y.port
Configure the interval for the IP phone to
retry to re-register when registration fails.
Parameter:
account.X.reg_fail_retry_interval
Web User Interface
Configure the SIP account registration
information.
Navigate to:
http://<phoneIPAddress>/servlet?p=accou
nt-register&q=load&acc=0
Configure the interval for the IP phone to
retry to register when registration fails.
Navigate to:
http://<phoneIPAddress>/servlet?p=accou
nt-adv&q=load&acc=0
Phone User Interface
Configure the SIP account registration
information.