Setting Up Your System
45
2. Enter the desired host name in the DHCP Hostname field.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4. Click OK to reboot the phone.
If DHCP is disabled or IP phones cannot obtain network parameters from the DHCP server, you
need to configure them manually. The following parameters should be configured for IP phones
to establish network connectivity:
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Procedure
Network parameters can be configured manually using the following methods.
Central Provisioning
(Configuration File)
Configure network parameters of the IP phone
manually.
Parameters:
static.network.internet_port.type
static.network.ip_address_mode
static.network.internet_port.ip
static.network.internet_port.mask
To Next Page
Loading...
Need help?
General
