Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
44
Parameter
Permitted Values
Default
The default value is SIP-T40P.
For SIP-T40G IP phones:
The default value is SIP-T40G.
For SIP-T29G IP phones:
The default value is SIP-T29G.
For SIP-T27P IP phones:
The default value is SIP-T27P.
For SIP-T27G IP phones:
The default value is SIP-T27G.
For SIP-T23P IP phones:
The default value is SIP-T23P.
For SIP-T23G IP phones:
The default value is SIP-T23G.
For SIP-T21P E2 IP phones:
The default value is SIP-T21P_E2.
For SIP-T21 E2 IP phones:
The default value is SIP-T21_E2.
For SIP-T19P E2 IP phones:
The default value is SIP-T19P_E2.
For SIP-T19 E2 IP phones:
The default value is SIP-T19_E2.
Note: If you change this parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Features->General Information->DHCP Hostname
Phone User Interface:
None
To configure DHCP option 12 hostname on the IP phone via web user interface:
1. Click on Feature->General Information.