Getting Started
33
Contact files
For more information on resource files, refer to Resource Files on page 129.
Verifying Startup
After connected to the power and network, the IP phone begins the initializing process by
cycling through the following steps:
1. The power indicator LED illuminates solid red.
2. The message “Welcome Initializing… please wait” appears on the LCD screen when the IP
phone starts up.
3. The main LCD screen displays the following:
Time and date
Soft key labels
4. Press the OK/√ key or press Menu->Status to check the IP phone status, the LCD screen
displays the valid IP address, MAC address, firmware version, etc.
If the IP phone has successfully passed through these steps, it starts up properly and is ready for
use.
To Next Page
Loading...
Need help?
General
