Configuring Basic Features
197
You can configure the line key in the right bottom to be fixed as a switch page key. Then you
can always use this key. It is especially useful for users who need to configure multi-page line
keys.
Each page of the line keys has a corresponding page icon. For more information on page icon,
refer to Enable Page Tips on page 197.
It is only applicable to SIP-T46G/T46S/T42G/T42S/T41P/T41S/T29G/T27P/T27G IP phones.
Procedure
Page switch key can only be configured using the configuration files.
Central Provisioning
(Configuration File)
Configure the page switch key.
Parameter:
features.keep_switch_page_key.enab
le
Details of the Configuration Parameter:
features.keep_switch_page_key.enable
Description:
Enables or disables the line key in the bottom right of the phone to be fixed as a page switch
key.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the page icons appear only if a line key not located on the first
page is assigned functionality. Then you can use the line key in the bottom right to switch
pages.
Note: It is only applicable to SIP-T46G/T46S/T42G/T42S/T41P/T41S/T29G/T27P/T27G IP
phones.
Web User Interface:
None
Phone User Interface:
None
Enable Page Tips
Enable page tips feature allows users to enable the page icon and page switch key LED on the
phone to indicate different statuses. It is mainly used in the scenario of configuring multi-page
line key. It is only applicable to SIP-T46G/T46S/T42G/T42S/T41P/T41S/T29G/T27P/T27G IP
phones.
To Next Page
Loading...
Need help?
General
