To Next Page

To Previous Page

Troubleshooting

917

(Configuration File)

Parameter:

static.watch_dog.enable

Web User Interface

Configure Watch Dog feature.

Navigate to:

http://<phoneIPAddress>/servlet?p=

settings-preference&q=load

Details of the Configuration Parameter:

Parameter

Permitted Values

Default

static.watch_dog.enable

0 or 1

Description:

Enables or disables the Watch Dog feature.

0-Disabled

1-Enabled

If it is set to 1 (Enabled), the IP phone will reboot automatically when the system is broken

down.

Web User Interface:

Settings->Preference->Watch Dog

Phone User Interface:

None

To configure watch dog feature via web user interface:

1. Click on Settings->Preference.

2. Select the desired value from the pull-down list of Watch Dog.

3. Click Confirm to accept the change.

Status indicators may consist of the power LED, MESSAGE key LED, line key indicator, headset

Yealink SIP-T2 Series User Manual

Other manuals for Yealink SIP-T2 Series