Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
318
Call Log
IP phones record and maintain phone events to a call log, also known as a call list. The call log
contains call information such as remote party identification, time and date of the call, and call
duration. It can be used to redial previous outgoing calls, return incoming calls, and save contact
information from call log lists to the contact directory.
IP phones maintain a local call log. Call log consists of four lists: Missed Calls, Placed Calls,
Received Calls, and Forwarded Calls. Each call log list supports up to 100 entries. To store call
information, you must enable save call log feature in advance. You can access the call history
information via web user interface: Directory->Phone Call Info.
Note
Procedure
Call log can be configured using the following methods.
Central Provisioning
(Configuration File)
Configure call log feature.
Parameter:
features.save_call_history
Configure call log feature.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Configure call log feature.
Details of the Configuration Parameter:
features.save_call_history
Description:
Enables or disables the IP phone to save the call log.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone cannot log the missed calls, placed calls, received calls
You can identify call types by the icons from a combined call log list (e.g., All Calls). For more
information on icons, refer to Appendix G: Reading Icons on page 975.
To Next Page
Loading...
Need help?
General
