Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
282
Dial Now
Dial now is a string used to match numbers entered by the user. When entered numbers match
the predefined dial now rule, the IP phone will automatically dial out the numbers without
pressing the send key. IP phones support up to 100 dial now rules, which can be created either
one by one or in batch using a dial now rule template. For more information on how to
customize a dial now template, refer to Customizing Dial Now Template File on page 285.
Time Out for Dial Now Rule
The IP phone will automatically dial out the entered number, which matches the dial now rule,
after a specified period of time.
Procedure
Dial now rule can be created using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Create the dial now rule for the IP
phone.
Parameters:
dialplan.dialnow.rule.X
dialplan.dialnow.line_id.X
Configure the delay time for the dial
now rule.
Parameter:
phone_setting.dialnow_delay
Web User Interface
Create the dial now rule for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servlet?p
=settings-dialnow&q=load
Configure the delay time for the dial
now rule.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
dialplan.dialnow.rule.X
(X ranges from 1 to 100)
String within 511 characters
Blank

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English