Yealink SIP-T2 Series User Manual

Configuring Basic Features
283
Parameters
Permitted Values
Default
Description:
Configures the dial now rule (the string used to match the numbers entered by the user).
When entered numbers match the predefined dial now rule, the IP phone will automatically
dial out the numbers without pressing the send key.
Example:
dialplan.dialnow.rule.1 = 123
Note: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Settings->Dial Plan->Dial Now->Rule
Phone User Interface:
None
dialplan.dialnow.line_id.X
(X ranges from 1 to 100)
Refer to the following content
Blank (for
all lines)
Description:
Configures the desired line to apply the dial now rule. The digit 0 stands for all lines. If it is
left blank, the dial now rule will apply to all lines on the IP phone.
Permitted Values:
0 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
0 to 12 (for SIP-T42G/S)
0 to 6 (for SIP-T41P/T41S/T27P/T27G)
0 to 3 (for SIP-T40P/T40G/T23P/T23G)
0 to 2 (for SIP-T21(P) E2)
Example:
dialplan.dialnow.line_id.1 = 1,2
Note: Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P) E2 IP
phones. It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Settings->Dial Plan->Dial Now->Account
Phone User Interface:
None
phone_setting.dialnow_delay
Integer from 0 to 14
1
Description:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English