Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
284
Parameters
Permitted Values
Default
Configures the delay time (in seconds) for the dial now rule.
When entered numbers match the predefined dial now rule, the IP phone will automatically
dial out the entered number after the designated delay time.
If it is set to 0, the IP phone will automatically dial out the entered number immediately.
Note: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Features->General Information->Time Out for Dial Now Rule
Phone User Interface:
None
To create a dial now rule via web user interface:
1. Click on Settings->Dial Plan->Dial Now.
2. Enter the desired value in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the dial now rule will apply to all accounts on the IP
phone.
4. Click Add to add the dial now rule.
To configure the time out for dial now rule via web user interface:
1. Click on Features->General Information.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English