Yealink SIP-T2 Series User Manual

Configuring Basic Features
285
2. Enter the desired time within 0-14 (in seconds) in the Time Out for Dial Now Rule field.
3. Click Confirm to accept the change.
Customizing Dial Now Template File
The dial now template helps with the creation of multiple dial now rules. After setup, place the
dial now template to the provisioning server and specify the access URL in the configuration
files.
You can ask the distributor or Yealink FAE for dial now template. You can also obtain the dial
now template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage. For more
information on obtaining the dial now template, refer to Obtaining Boot Files/Configuration
Files/Resource Files on page 131.
When editing a dial now template, learn the following:
 <DialNow> indicates the start of a template and </DialNow> indicates the end of a
template.
 When specifying the desired line(s) for the dial now rule, the valid values are 0 and line ID.
Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P) E2 IP phones.
The following table lists valid values of line ID for each phone model.
Phone Model
Values
Description
SIP-T48G/T48S/T46G/T46S/
T29G
0~16
0 stands for all lines
1~16 stand for line1~line16
SIP-T42G/S
0~12
0 stands for all lines
1~12 stand for line1~line12

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English