Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
286
Phone Model
Values
Description
SIP-T41P/T41S/T27P/T27G
0~6
0 stands for all lines
1~6 stand for line1~line6
SIP-T40P/T40G/T23P/T23G
0~3
0 stands for all lines
1~3 stand for line1~line3
SIP-T21(P) E2
0~2
0 stands for all lines
1~2 stand for line1~line2
 At most 100 rules can be added to the IP phone.
The expression syntax in the dial now rule template is the same as that introduced in the section
Dial Plan using XML Template Files on page 276.
To customize a dial now template:
1. Open the template file using an ASCII editor.
2. Create dial now rules between <DialNow> and </DialNow>.
For example:
<Data DialNowRule="1001" LineID="0" />
Where:
DialNowRule="" specifies the dial now rule.
LineID="" specifies the desired line(s) for this rule. When you leave it blank or enter 0, this
dial now rule will apply to all lines.
If you want to change the dial now rule, specify the values within double quotes.
3. Save the change and place this file to the provisioning server.
4. Specify the access URL of the dial now template.
Procedure
Specify the access URL of the dial now template using the configuration files.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the access URL of the dial
now template.
Parameter:
dialplan_dialnow.url

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English