Yealink SIP-T2 Series

Configuring Basic Features
399
Return Code When Refuse
Return code when refuse defines the return code and reason of the SIP response message for
the refused call. The caller’s phone LCD screen displays the reason according to the received
return code. Available return codes and reasons are:
 404 (Not Found)
 480 (Temporarily Unavailable)
 486 (Busy Here)
 603 (Decline)
The following shows an example of the returned reason for the refused call:
Procedure
Return code for refused call can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Specify the return code and the
reason of the SIP response message
when refusing a call.
Parameter:
features.normal_refuse_code
Web User Interface
Specify the return code and the
reason of the SIP response message
when refusing a call.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.normal_refuse_code
404, 480, 486 or 603
486