Yealink SIP-T2 Series User Manual

Configuring Basic Features
281
LineID="" specifies the desired line(s) for this rule. When you leave it blank or enter 0, this
replace rule will apply to all lines.
If you want to change the replace rule, specify the values within double quotes.
3. Save the change and place this file to the provisioning server.
4. Specify the access URL of the replace rule template in the configuration files.
Procedure
Specify the access URL of the replace rule template using the configuration files.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Specify the access URL of the
replace rule template.
Parameter:
dialplan_replace_rule.url
Details of Configuration Parameter:
Parameter
Permitted Values
Default
dialplan_replace_rule.url
URL within 511 characters
Blank
Description:
Configures the access URL of the replace rule template file.
Example:
dialplan_replace_rule.url = http://192.168.10.25/dialplan.xml
During the auto provisioning process, the IP phone connects to the provisioning server
“192.168.10.25”, and downloads the replace rule file “dialplan.xml”.
Note: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
None
Phone User Interface:
None

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English